QUICK CHANGE SYSTEMS PRODUCTS

Quick Change

contact us

Precise mechanical systems provide fast, accurate tool changeover.


 

QUICK CHANGE SYSTEMS APPLICATIONS


 

Quick Change | Thermoforming Accessories | Tooling Technology

Model 250 Cylinder Lock



model 250 cylinder locks

Reduce Downtime and Increase your Profitability

Make changeovers simple, safe and secure. Precisely and quickly locate your smaller tools with Segen's Micro Cylinder. Significantly reduce downtime, setup and production costs. The Segen Quick Change system will pay for itself time and time again.


Micro Sized, Numerous Applications

The PD250 micro cylinder, with a flange diameter of 15/16" (0.9375") x 0.060", and weighing in at a mere 0.13 lbs. (including knob) is a perfect fit for holding smaller tools, logos, mold inserts, dies, jigs and fixtures where the performance requirements are for small envelopes and reduced locking forces.


Precision, Speed, Durability

Engineered for long life with a tested lifespan of over 40,000 cycles, the micro cylinder's load rating of 500 lbs. provides the precision, accuracy and stability for smaller and lighter load applications. The stainless steel, corrosion resistant micro PD250 cylinder locks are temperature rated from -65 to 450 degrees F.


Variety, Simplicity, Efficiency

Both standard and metric thread versions are available along with a variety of high strength, hardened steel knobs. The micro cylinders can be customized for sealed applications in hostile environments. Suitable for in plate mounting utilizing the rear air fitting or enclosed in a housing with a supply manifold, the micro cylinder locks are easily installed using a clever installation tool that fits any standard 1/4" socket drive.



model 250 cylinder locks model 250 cylinder locks



PD250X3 Standard Micro Cylinder
standard micro cylinderOverall height 1.563" x 7/8 x 20 Thread. Flange diameter 0.9375" x 0.060". #10-32 UNF-2B air supply fitting at rear.

Model 250 Cylinder Lock Spec SheetModel 250 Cylinder Lock Spec Install Guidelines

Catalog #

Price

PD250X3

$405


Do you have an installation tool? - Our Micro Cylinders must be installed using our installation tool. Screwing the cylinder lock into its mounting plate without th einstallation tool will cause damage to the cylinder lock. Please see below for information on the installation tool.



PD250X2 Metric Micro Cylinder
metro micro cylinderOverall height 40mm, M20 x 1.5 Thread. Flange diameter 22mm x 2mm. M5 x 0.8 air supply fitting at rear.

Model 250 Cylinder Lock Spec SheetModel 250 Cylinder Lock Spec Install Guidelines

Catalog #

Price

PD250X2

$405


Do you have an installation tool? - Our Micro Cylinders must be installed using our installation tool. Screwing the cylinder lock into its mounting plate without th einstallation tool will cause damage to the cylinder lock. Please see below for information on the installation tool.



PDIT250 Micro Cylinder Installation Tool

micro cylinder installation toolOur Micro Cylinders must be installed using our installation tool. The tool fits into a 1/4 socket drive. The barbs of the bit slide down into the conical surface of the cylinder lock, between the balls, enabling you to screw the cylinder into the mounting plate. Screwing the cylinder lock into its mounting plate with vice-grips, pliers, or any other means could smash the cylidner body out of shape or break the cylinder body loose from its precise connection with the flanged cap, resulting in misalignment or malfunction. We recommend using a brand-new tap when making the threaded installation pockets for your micro cylinders. This will aid in proper mating thread alignment, reduce torque pressure and prolong the life of your installation tool.


Catalog #

Price

PDIT250

$50



PD250STD4 - Knob - Stud
knob studOverall Size: 1.043" H x 0.437" Diamter. Location Boss 0.2805" Diameter x 0.100 High. 1/4x28 Stud x 0.500 L.

Model 438 Cylinder Lock Shouldered Spec SheetModel 438 Cylinder Lock Shouldered Spec Install Guidelines

Catalog #

Price

PD250STD4

$40



PD250T - Knob - Tapped
knob tappedOverall Size: 0.643" H x 0.437" Diameter. Location boss 0.2805" Diameter x 0.100" H. Center tapped with #8-32

Model 438 Cylinder Lock Shouldered Spec SheetModel 438 Cylinder Lock Shouldered Spec Install Guidelines

Catalog #

Price

PD250T

$40



PD250SA - Knob - Without Locating Boss
knob self-aligningOverall Size: 0.5343" H x 0.437" Diameter. Center tapped with #8-32.

Model 438 Cylinder Lock Shouldered Spec SheetModel 438 Cylinder Lock Shouldered Spec Install Guidelines

Catalog #

Price

PD250SA

$40



PD250 Air Fittings

PD250X3LB1 Elbow Hose Barb Single Barb for 1/16" ID Hose

Brass with #10-32 thread. Includes fibre gasket. Sold in packs of 10 - $29


PD250X3TE1 Tee Hose Barb Doub Barbs for 1/16" ID Hose

Brass with #10-32 thread. Includes fibre gasket. Sold in packs of 10 - $35


PD250X2LB1 Elbow Hose Barb Single Barb for 1/16" ID Hose

Brass with M5 x 0.8 thread. Includes fibre gasket. Sold in packs of 10 - $29


PD250X2TE1 Tee Hose Barb Doub Barbs for 1/16" ID Hose

Brass with M5 x 0.8 thread. Includes fibre gasket. Sold in packs of 10 - $35


Note: Above fittings to be used with Polyurethane Hose part number PD375UT1


contact us